Redi-Exit Economy Egress System Kits

OVERVIEW

REDI-EXIT® Egress System Kits come with an Egress Window, Egress Well, Well Ladder and Clip-on Clear LEXAN Sloped Clam Shell Egress Cover. All these products meet the current International Residential Code (IRC) which is the code all municipalities follow when writing their local codes. These four products are the parts typically needed to install a basement egress system and can be supplies in 7-9 business days from inventory.

We have selected these beautiful “Made in America” Egress System Kits with cost in mind, they are a specially priced as a full kit to allow for us to supply one of the most competitively priced kits on the internet.

Order online or Call REDDCO Incorporated toll free at (866) 996-1989

CLICK HERE FOR PRICING AND TO PURCHASE THE KITS ONLINE

 

DETAILS & SPEC’S:

Egress Windows:

CASEMENT IN-SWING: Our 42” or 49” wide wells are supplied with your choice of either a 27” wide x 45” high x 3 1/4” jamb depth or 31” wide x 40” high x 8” jamb depth Casement In-swing Egress Windows that are energy star rated with a U-factor of 0.26. They can be flipped over to change the hinge from the left side the right side as both surfaces have weep holes.

Click here for more In-swing Egress Window information.

 

 

Sliding Egress Windows:

The 55” wide well is supplied with a 48” wide x 48” high x 8” jamb depth Sliding Egress Window that is also Energy Star Rated or with either of the two casement in-swing windows above.

Click here for more Sliding Window information.

 

 

Economy Egress Wells & Well Ladders:

Economy Egress Wells and Well Ladders supplied as part of our kits meet all current IRC Code requirements. The one-piece Wells are constructed of heavy 18-gauge galvanized steel that is powder coated white on the inside and tan on the outside over the galvanized finish. They require no on-site assembly. Well kits are available in either 42”, 49” or 55” widths and 48” or 60” depths. 

Click here for more Well information

 

 

Economy Sloped Covers:

The Economy Sloped Clam Shell Clip-on Egress Covers are made from polycarbonate plastic resin that is treated against yellowing and crazing (spider webbing) prior to the fabrication of the sheet material and comes with a 15-year Limited Warranty. Polycarbonate (LEXAN) is the same material that football helmets are made of. These Covers sit 1 1?2” high at the foundation wall and slop to the well surfaces they are capable of holding up to 500 pounds. 

Click here for more Cover information.

 

NOTE: Snow must be removed from the top of the cover after each snow storm to assure the cover doesn’t get too heavy to lift in an emergency.

 

CLICK HERE FOR PRICING AND TO PURCHASE THE KITS ONLINE

OR
Call REDDCO Incorporated toll free at (866) 996-1989