REDI-EXIT® Compact Series Single Hung In-swing Egress Windows are designed to meet the IRC Code requirements of 5.7 square feet of clear area, 20” minimum width and 24” minimum height.
These “Made in the U.S.A.” Single Hung In-swing Egress windows are great for replacement or new construction. They have a 10-year limited warranty on the glass seal and life time on the Vinyl.
These windows are shipped with a half screen for the lower sash.
Compact Series Egress Windows are designed to work with all REDDCO Inc. Egress Wells.
Details & Specs
These dual function vinyl windows operate in two ways; 1) as a normal single hung window, with the lower sash opening for ventilation; 2) in the event of an emergency, a latch in the corner of the window is opened and the top and bottom sashes hinge into the room like a door for easy escape.
REDI-EXIT® Compact Series Single Hung In-swing Egress Windows are available in four stock sizes; 28” wide x 46” high x 3 ¼ jam depth; 31” wide x 41” high x 3 ¼” jam depth; 35 1/2” wide x 36” high x 3 ¼” jam depth; and 35 ½” wide x 53 ½” high x 3 ¼” jam depth, in both right hinged and left hinged configurations.
The 28” wide x 46” high x 3 ¼” jam depth; 31” wide x 41” high x 3 ¼” jam depth Compact Egress Windows are stocked in both Clear Glass and Low-e Glass with Argon Gas Fill.
Windows Supplied with Clear Glass have a U-factor 0f 0.30 while Windows built with Low-e Glass and Argon Gas Fill have a U-factor of 0.24.
REDDCO’S egress windows are build with special egress style hinges, that hinge the window open at the inside edge of the window frame, allowing the maximum possible opening area.
REDI-EXIT® Compact Series Single Hung In-swing Egress Windows can be special ordered in 1/4” increments to fit any size requirements with the following options: Tempered Glass, Argon Gas Filled, Low-e Glass, Nailing Fins, Obscure Glass, Grids between the glass, burglar proof Stainless Steel Security Screen.
Top and side Glass Transoms are also available for these Egress Windows.
To Determine the net clear area of these windows, subtract 7 ½” from the width and 5” from the height to determine the net clear area of these Egress Windows.
The recommended rough opening (R.O.) for these windows is ½” larger than the window size I.E. 31” x 41” window would have a recommend R.O. of 31 ½” x 41 ½”