Custom made clear LEXAN® polycarbonate structural Well Covers can be made in any size and shape to fit Steel, Concrete, Brick, Wood, Block or Stone Egress or Non-Egress Window Wells. These covers can be supplied in four different styles: one – Flat & Sloped Well Covers, two – Atrium Well Covers and three – Atrium Dome Well Covers, and four – Specialty Well Covers.
REDDCO’S Custom-Made flat and sloped Egress and Non-Egress Well Covers are constructed of Clear Lexan® polycarbonate plastic with milled finished aluminum supports, allowing the maximum amount of light to enter your Egress Well. They will support up to 400 pounds and are used when the Well Window sits totally in the Egress or Non-Egress Well.
Our Custom-Made Egress and Non-Egress Atrium Covers are used when the window sits above the top of the well but doesn’t open into the well. These covers will support 150 pounds without aluminum reinforcement and 250 pounds with aluminum reinforcement.
Custom-made Egress and Non-Egress Atrium Dome Covers are used when the window sits above the top of the well and opens into the well. These covers will support 150 pounds without aluminum supports and 250 pounds with aluminum reinforcement.
Specialty Covers can be designed by our technicians to solve many unusual Egress and Non- Egress cover problems.
These beautiful “Made in America” custom sized covers are a great way to cover a new fabricated Window Well or to replace a worn-out Window Well Cover.
NOTE: Custom Covers are not returnable, it is the responsibility of the homeowner, landlord, architect, contractor, or builder who orders the cover to approve the drawing we supply prior to the start of fabrication. Photos of the Well are required prior to starting the drawings.
Details & Specs
REDI-EXIT® Custom made clear LEXAN® Well Covers are available in widths as small as 12” and as large as 144”. We can manufacture covers with a projection as small as 9” and as large as 65” to fit any shape well.
These structural Egress Well Covers can be designed to hold up to 400 pounds, allowing someone who accidently stands on the cover not to fall in or to a handle a heavy snow load. Please let us know your load requirements when asking for a quote.
Our optional REDI-EXIT® Custom made Hinged Well Covers can be designed to fasten to the foundation wall or top surface of the Well and hinge open like a child’s toy box reducing the effort to lift the cover during an emergency. They come with a prop so the Cover can be propped open during nice weather. They can also be fabricated with an optional sloped top so snowmelt and rain will run off.
For In-swing Windows that stick above the top of well we can supply flat or sloped clip-on cover with an optional Clear Lexan® polycarbonate plastic Back Panel or Splash Panel that seals the part of the Window that sticks above the Well.
For In-swing and some Out-swing Windows that stick above the top of a Well we can manufacture a Custom Atrium Well Cover that lets all the light in.
For Out-swing Windows that stick above the top of a Well we can supply a Custom Atrium Domed Style cover that will allow a Window that sticks above the Well to open cleanly.
The polycarbonate plastic resin used to fabricate our Egress and Non-Egress Well covers is treated against yellowing and crazing (spider webbing) prior to the fabrication of the material and comes with a 7-year Limited Warranty.
It takes REDDCO Incorporated about 4-weeks to manufacture a custom sized cover once we receive all the information needed. We are expert at designing covers to fit any configuration you may need.
NOTE: Snow must be removed from the top of the cover after each snow storm to assure the cover doesn’t get too heavy to lift in an emergency.
Call REDDCO Incorporated toll free at (866) 996-1989 for Price and Delivery.