Compact Economy Well Covers
hold 400 pounds
Compact Economy Well Ladder
Compact Economy Well view from inside
Compact Economy Well
Compact Economy Egress Wells are just 9.5 square feet in size, making them one of the smaller egress window wells available in the market today that meets the IRC Code requirement of 9.0 square feet minimum of surface area.
These “Made In The USA” wells and covers are typically used when space to install an egress well is limited and cost is a major factor in egress well selection.
Details & Specs
These one-piece Wells are constructed of galvanized (90G) corrugated steel, that are painted white on the inside and tan on the outside. These Egress Wells have a 3/4” rolled edge for safety and strength.
Compact Economy Egress Wells are available in one 42” width, have a 36” projection off the foundation wall and come in four heights 24”,36”, 48” and 60”. These egress wells have an outside width of 43 1/2” and a outside projection of 36 3/4”.
Compact Economy Series Egress Wells that are higher than 44” are required to have a ladder to meet the current IRC Code. Our matching white steel Economy Egress Well Ladder is an easy way to meet this need.
These one-piece wells require no on site assembly, and the rigid it corrugated steel construction means no wood bracing during back filling, making them one of the easiest egress wells to install. All wells come with 2 ½” wide mounting flanges on both sides to anchor and seal them to the foundation wall.